![](/images/new-backgrounds/1172943/172943171x1.webp)
Appendix C Configuring the Switch with the CLI Setup Program
Accessing the CLI Through the Console Port
Figure C-1 Connecting the Console Cable
1
2
1
208386
1
2
Console cable
Step 3 Configure the baud rate and character format of the PC or terminal to match the console port characteristics:
•9600 baud
•8 data bits
•1 stop bit
•No parity
•None (flow control)
Step 4 Connect power to the switch as described in Chapter 3, “Power Supply Installation.”
Step 5 The PC or terminal displays the bootloader sequence. Press Enter to display the setup prompt. Follow the steps in the “Completing the Setup Program” section on page
Cisco IE 3010 Switch Hardware Installation Guide
|
| ||
|
|