Samsung AW0500 AW0500A manual 7Extend the window filler panels

7Extend the window filler panels.

7-1 Secure the window brackets to the stool using the Type A screw at each side.

7-2 Secure the top mounting channel to the bottom sash with the Type A screw in the center.

7-3 Extend the window filler panels into the window sash tracks

on both sides. When the window is pulled down, the window should rest on the unit just behind the window filler panel frames.

7-4 Slide the window filler panels outward until they touch the sides of the window. Secure the panels by putting four Type A screws through the mounting holes in the panels and driving them into the window stool and sash.

8Install the window gasket.

Cut the foam window gasket to the window width and stuff it between the window and the glass to prevent air and insects from getting into the room.

Type “A” screws

Window bracket (Type “C”)

Type “A” screw

9Check for air leaks and seal.

10Plug in the power, switch on the air conditioner, turn the SELECTOR to COOL mode and check for unusual vibrations.

Note After several minutes the unit will be blowing out cold air.

If the unit is not cold, please return it to the dealer.

E-15