Samsung AW0500 AW0500A manual Drain system installed, Without drain system installed

Installation (Cont.)

4Attach the seal strip to the window.

Rear
	Rubber Cap
Rear
Rubber Cap	Gasket
	Drain Plug
	Drain Hose

4˚

4-1 Cut the adhesive-backed foam seal strip gasket to the window width.

4-2 Remove the backing from the seal strip and attach the strip to the underside of the bottom window.

5Install the drain plug. (The unit does not require any separate drain system. However, a separate drain plug can be installed if needed.)

	Cooling capacity	Noise
Drain system installed	Decreased	Decreased
Without drain system installed	Increased	Increased

5-1 Remove the rubber cap inserted into the basepan.

5-2 Fix the drain plug as shown in the figure, and then connect the drain hose.(You can use any commercially-available drain hose.)

6Install the unit in the window.

6-1 Place the air conditioner cabinet into the window with the top support channel positioned just in front of the bottom sash.

6-2 Center the cabinet, side to side in the window then pull the window down until it rests on the air conditioner, just behind the mounting channel front flange on top of the cabinet.

6-3 Make sure the cabinet maintains a slightly downward slant to the outside. A 4˚ slant, cabinet front to rear is desirable to help prevent water from entering the room.

E-14