Selecting Energy Saving mode
Remote Control | Control Panel | If you wish to save energy when using your air conditioner, | |
select the energy saving mode with the Energy Saver button. | |||
|
| ||
|
| 1 To select the energy saving mode, press the Energy Saver button on the remote | |
|
| control or unit one or more times until the Energy Saver indicator lights up. | |
|
| Result: ◆ The fan and compressor cycle on and off together. | |
|
| ◆ The fan will continue to run for a short time after the | |
|
| compressor cycles off. | |
|
| ➢ If you would like the air conditioner to run in Fan mode, do not press | |
|
| the Energy Saver button. You cannot use the Fan mode in the energy | |
|
| saving mode. | |
|
| 2 To stop the energy saving mode, press the Energy Saver button on the | |
|
| remote control or unit again. |
Result:
➢
The fan runs at all times, while the compressor cycles on and off.
If you select the Sleep Timer in the Energy Saving mode, the Energy Saving will be cancelled and the air conditioner will start up in the Sleep Timer mode.
Temperature and Humidity Ranges
The following table indicates the temperature and humidity ranges within which the air conditioner can be used.
Mode | Indoor Temperature | Outdoor Temperature | Indoor Humidity |
|
|
|
|
Cooling | 21°C to 32°C approx. | 21°C to 43°C approx. | 80% or less |
|
| 21°C to 54°C approx.(Middle East) |
|
|
|
| |
|
|
|
|
If the air conditioner is used at... | Then... |
| |
|
|
| |
Higher temperatures |
| The automatic protection feature may be triggered and the air | |
|
| conditioner stopped. |
|
|
|
| |
Lower temperatures |
| A water leakage or some other malfunction may happen if the | |
|
| heat exchanger freezes. |
|
|
| ||
Higher humidity levels | Water may condense on and drip from the surface of the unit if | ||
|
| it is used for long periods. |
|
|
|
|
|
