Installing the Washing Machine

Selecting a location

Before you install the washing machine, select a location with the following characteristics:

•A hard, level surface (if the surface is uneven, see "Adjusting the leveling feet," below)

•Away from direct sunlight.

•Adequate ventilation

•Room temperature that will not fall below 0 ˚C

•Away from sources of heat such as coal or gas

Make sure that the washing machine does not stand on its power cord.

Ventilation openings must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.

Adjusting the leveling feet

If the floor is uneven, adjust the feet (do not insert pieces of wood or any other objects under the feet):

1.Loosen the leg bolt by turning it with your hand until it is at the desired height.

2.Tighten the locking nut by turning it with the supplied wrench.

•Place the washer on a sturdy, flat surface.

If the washer is placed on an uneven or weak surface, noise or vibration occurs. (Only a l degrees angle is allowed.)

Removing the shipping bolts

Before using the washing machine, you must remove the five shipping bolts from the back of the unit. To remove the bolts:

1.Loosen all bolts with the supplied wrench before removing them.

2.Take each bolt head and pull it through the wide part of the hole. Repeat for each bolt.

3.Fill the holes with the supplied plastic covers.

4.Keep the shipping bolts for future use.

Connecting the water supply hose(Option)

1. Remove the adaptor from the

 

 

4. Connect the water supply hose to the adaptor.

 

 

Pull down part (c) of the water supply hose.

water supply hose.

 

 

 

 

c

When you release part (c) the hose automatically

 

 

 

connects to the adaptor making a ’click’ sound.

2. First, using a “+” type screw driver, loosen the

 

 

5. Connect the other end of the water supply hose

four screws on the adaptor. Next, take the

 

 

to the inlet water valve at the top of the washer.

adaptor and turn part(b) following the arrow until

 

 

Screw the hose clockwise all the way in.

there is a 5mm gap.

 

 

 

3. Connect adaptor to the water tap by tightening

 

 

• If the water tap has a screw type faucet, connect

the screws firmly.

a

 

the water supply hose to the tap as shown.

Then, turn part (b) following the arrow and put(a)

 

 

b

 

 

and (b) together.

 

 

 

NOTICE After completing connection, if water leaks from the hose, then repeat the same steps. Use the most conventional type of faucet for water supply. In case the faucet is square or too big, remove the spacing ring before inserting the faucet into the adaptor.

SAMSUNG Washing Machine Owner’s Instructions 3

Page 4 Page 6
Page 5
Image 5
Samsung B1513J, B915J, B1413J, B815J, B1415J Selecting a location, Adjusting the leveling feet, Removing the shipping bolts
Page 4 Page 6

B1213J, B1115J, B913J, B915J, B1015J specifications

The Samsung B1013J, B1215J, B1415J, B1315J, and B1113J represent a line of innovative air conditioners designed to deliver efficient cooling solutions for residential and commercial spaces. These models are tailored to meet the diverse needs of consumers who seek comfort, energy efficiency, and advanced technology in climate control systems.

One of the main features across these air conditioning units is the use of inverter technology. This allows the compressor to operate at variable speeds, adjusting its performance according to the room’s cooling requirements. As a result, energy consumption is reduced significantly while maintaining a consistent temperature. This not only leads to lower electricity bills but also promotes environmental sustainability by minimizing the carbon footprint.

Each model incorporates a user-friendly digital display, enabling easy control of settings such as temperature, fan speed, and operational modes. Most units also come equipped with a remote control for added convenience, allowing users to adjust settings from across the room. The air conditioner’s programmable timer feature allows for customized operation, ensuring the unit operates only when needed.

Another notable characteristic is the enhanced air filtration system present in these models. With advanced filtration technology, these air conditioners effectively eliminate dust, allergens, and other particulate matter from the air, promoting a healthier indoor environment. Some models additionally feature a sterilization function that further purifies the air, making them an excellent choice for households with children or individuals with respiratory issues.

The design of these air conditioning units is also noteworthy. Sleek and modern, they can blend seamlessly into various interior styles while providing robust performance. Additionally, they are relatively quiet, with noise levels optimized to maintain a peaceful indoor atmosphere, making them suitable for bedrooms, offices, and other quiet spaces.

Durability and reliability are other essential characteristics of the Samsung B-series air conditioners. Constructed with high-quality components, these units are built to withstand varying environmental conditions, ensuring long-term performance. Extended warranties and customer support further highlight Samsung's commitment to customer satisfaction.

Overall, Samsung's B1013J, B1215J, B1415J, B1315J, and B1113J air conditioning models reflect the company's dedication to delivering advanced cooling technology that prioritizes energy efficiency, user comfort, and air quality.
Top Page Image Contents