10.When done, press the YELLOW(C) button on your remote, or move to the Done button, and then press the ENTER button.
The Network Connecting screen appears.
11.Wait until the connection confirmation message is displayed, and then press the ENTER button. The Network Settings screen reappears.
12.To test the connection, press the ▼ button to select Network Test, and then press the ENTER button.
Setting Up the Wireless Network Connection - Manual
If the Auto Setting does not work, you need to enter the Network settng values manually.
To get the Network setting values from most Windows computers, follow these steps:
1.Right click the Network icon on the bottom right of the screen.
2.In the
3.On the dialog that appears, click the Support tab.
4.On the Support tab, click the Details button. The Network settings are displayed.
To Enter the Network settings into your product, follow these steps:
1.On the Internet Protocol Setup screen, press the ENTER button.
2.Press the ▲▼ buttons to select Manual, and then press the ENTER button.
3.Press the ▼ button to go to the first entry field (IP Address).
Settings
Display |
| Network Setting |
|
| |||
Access Point Selection | : Not Selected |
| |||||
Audio | \ | ||||||
SystemInternet Protocol Setup | : Manual |
|
| ||||
Network | IP Address | : | 0 | 0 | 0 | 0 | |
Language Subnet Mask | : | 255 | 255 | 255 | 0 | ||
Security | Gateway | : | 0 | 0 | 0 | 0 | |
GeneralDNS | : Manual | 0 | 0 | ||||
Support | DNS Server | : | 0 | 0 | |||
|
| a PBC (WPS) > Move | " Select | ' Return | |||
4.Use the number buttons to enter numbers.
5.When done with each field, use the ► button to move successively to the next field.
You can also use the other arrow buttons to move up, down, and back.
6.Enter the IP Address, Subnet Mask, and Gateway values.
7.Press the ▼ to go to DNS.
8.Press the ▼ button to go to the first DNS entry field. Enter the numbers as above.
9.When done, press the ▲ button to return to Access Point Selection. Select the network, and then press the ENTER button.
10.Go to Step 6 in the Automatic Wireless procedure above, and follow the directions from that point on.
Network Test
Use this menu to connect the wired network or check whether your network connection is working or not.
Network Status
Check whether a connection to the network and the Internet have been established.
05 Setup
English 39
