Samsung BD-C5500/XAA manual Wireless Network, You can connect to network with a Wireless IP sharer

Wireless Network

You can connect to network with a Wireless IP sharer.

1.A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the Wireless LAN Adapter on the rear panel of the product.

2.Set the network options. (See pages 36~39)

Broadband service

Wireless IP sharer	Wireless LAN Adapter
	(not included)

Networking with PC for AllShare function (See pages 56~57)

✎NOTE

▪Use only the Samsung wireless LAN adapter with this product. (Model name: WIS09ABGN). Do not use this adapter with any other third-party products.

Please contact the retailer of this product for purchasing the wireless LAN adapter.

▪You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the wireless network.)

▪Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance, distance, obstacles, interference by other radio devices, etc).

▪Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

▪When applying the security key for the AP (wireless IP sharer), only the following is supported.

1)Authentication Mode : WEP, WPAPSK, WPA2PSK

2)Encryption Type : WEP, AES

▪For the AllShare function, a PC must be connected in the network as shown in the figure.

04 Connections

English 27