Samsung BD-C8200/EDC, BD-C8500/EDC, BD-C8200/XEN, BD-C8500/XEN, BD-C8200/XEF manual Contact Samsung

Setup

You can also update software as follows: Software update is the same as in the By Internet menu.

•By USB : Insert a USB drive containing the firmware upgrade file, downloaded from “www. samsung.com/bluraysupport”.

Connect the USB flash drive to the USB port of the product to update the software, then follow the on-screen instructions.

Please be careful not to disconnect the power or remove the USB drive until upgrades are complete.

The BD-HDD combo will be turned off and on automatically after completing the firmware upgrade. “UPDATE” will appear on the front display.

The BD-HDD combo will be turned off and on automatically after completing the loader upgrade. The broadcasting channel will be displayed.

•By Disc : Visit www.samsung.com/ bluraysupport, download and write the latest software onto a disc.

If you downloaded the firmware you'll have a B-BAHDDEUC.file Burn a data disc with your CD burning software.

After disc is finalized insert it in the bd-hdd combo.

Please be careful not to disconnect the power until upgrades are complete.

The BD-HDD combo will be turned off and on automatically after completing the firmware upgrade. “UPDATE” will appear on the front display.

The BD-HDD combo will be turned off and on automatically after completing the loader upgrade. The broadcasting channel will be displayed.

•Alternative Software (backup) : Displays the Software version downloaded through By Online. During the Software upgrading, When the Upgrade will discontinue from last step, this function be activated.

✎NOTE

▪When the system upgrade is done, check the software details in the software Upgrade menu.

▪Do not turn off the product during the System Upgrade, as it may cause the product to not work properly.

▪Software upgrades using the USB Host jack must be performed with a USB memory flash stick only.

Contact Samsung

Provide contact information for assistance with your product.

48 English