Samsung BD-D6900/XN, BD-D6900/EN Cable Search Option, Standby Auto Store, Transfer Channel List

Setup

✎✎NOTE

`` If you select Quick, you can set up the Network, Network ID, Frequency, Modulation and Symbol Rate manually by pressing the button on the remote control.

-- Network (Auto / Manual) : Selects the Network ID setting mode either Auto or Manual.

-- Network ID : When Network is Manual, you can set up Network ID using the numeric buttons.

-- Frequency : Displays the frequency for the channel. (differs in each country)

-- Modulation : Displays available modulation values.

-- Symbol Rate : Displays available symbol rates. Manual Tuning

Scans for a channel manually and stores in the product.

-- When scanning has finished, channels are updated in the channel list.

✎✎NOTE

`` When selecting Antenna  Air : Channel, Frequency, Bandwidth.

When selecting Antenna  Cable : Frequency, Modulation, Symbol Rate

Cable Search Option

Sets additional search options such as the frequency and symbol rate for a cable network search.

-- Start Frequency/Stop Frequency : Set the start or stop frequency (differs in each country).

-- Symbol Rate : Displays available symbol rates.

-- Modulation : Displays available modulation values.

Standby Auto Store

You can turn standby auto store function on or off.

•Off : Turns standby auto store function off.

•On : Turns standby auto store function on.

✎NOTE✎

`` This menu can be displayed when the country set to Italy.

Transfer Channel List

This function can import or export the channel map. You should connect a USB storage to use this function. Enter your 4 digit PIN number when the PIN input screen appears.

• Import from USB : Import channel list from USB.

• Export to USB : Export channel list to USB. This function is available when USB is connected.

Edit Channel Number

Select this to edit the channel number in the channel manager. (See page 33)

• Disable : Select disable if you do not want to edit channel number.

• Enable : Select enable if you want to edit channel number.

This menu will be displayed only when you set the antenna source type and country as below.

Antenna source	Country
Air	Netherlands, Italy

Common Interface

Show the CI Menu Information screen.

•CI Menu : This enables the user to select from the CAM provided menu. Select the CI Menu based on the menu PC Card.

•Application Info. : View information on the CAM(Conditional Access Module) inserted into the CI slot and on the “CI CAM with CI or CI+ CARD” which is inserted into the CAM. You can install the CAM anytime whether the product is on or off.

1.Purchase a CI CAM at your nearest dealer or by phone.

2.Firmly insert the “CI CAM with CI or CI+ CARD” into the CAM in the direction of the arrow.

42 English