Samsung BD-E8900/EN, BD-E8500/EN Soft AP, Through the Wi-Fi Device, Through the Product Using PBC

Settings

5.You have three ways to complete the Wi-Fi connection:

•Through the Wi-Fi device.

•Through the product using PBC.

•Through the product using a PIN.

Each is covered below.

Through the Wi-Fi Device

1.On the Wi-Fi device, follow the procedure on the device for connecting to another Wi-Fi Direct device. See the device's user manual for instructions.

2.When you have completed the procedure, you should see a pop-up on your TV screen saying that a device that supports Wi-Fi Direct has requested to connect. Select OK, and then press the v button to accept.

3.The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.

Through the Product Using PBC

1.Select the Wi-Fi Direct device you want to connect to this product, and then press the v button. The PBC/PIN pop up appears.

2.Select PBC, and then press the v button. The PBC pop-up appears.

3.Press the PBC button on the Wi-Fi Direct device within 2 minutes.

4.The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.

Through the Product Using a PIN

1.Select the Wi-Fi Direct device you want to connect to this product, and then press the v button. The PBC/PIN pop up appears.

2.Select PIN, and then press the v button. The PIN pop-up appears.

3.Note the PIN code in the pop-up, and then enter it into the appropriate field in the Wi-Fi Direct device you want to connect.

4.The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.

NOTE

\\ The wired or wireless network connection will be disconnected when you use the Wi-Fi Direct function.

\\ Some Wi-Fi Direct devices may not support the AllShare function if connected via Wi-Fi Direct. If this is the case, it is advisable to change the network connection method between devices.

Soft AP

This product provides a function as a wireless Access Point.

Soft AP lets you connect other Wi-Fi devices to your network wirelessly through the product.

It requires that you create a security key which you must enter into the other Wi-Fi devices when you are connecting them to the network.

1.In the Home screen, select Settings, and then press the v button.

2.Select Network, and then press the v button.

3.Select Soft AP, and then press the v button.

4.Select On or Off, and then press the v button.

< To Set the Soft AP Security Key >

1.On the Soft AP screen, select Security Key, and then press the v button. The Security Key screen appears.

2.On the Security key screen, enter a security key. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the v button.

3.When done, use the the ▲▼◄► buttons to move to Done at the bottom of the screen, and then press the v button.

36 English