ĞĞWired - Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.
Follow Steps 1 and 2 in Wired - Automatic, and then follow these steps:
1. | Select Network Status. The product |
| searches for a network, and then displays the |
2. | connection failed message. |
On the bottom of the screen, select IP | |
| Settings, and then press the v button. |
3. | The IP Settings screen appears. |
Select the IP Settings field, and then press | |
4. | the v button. |
Select Enter manually in the IP Settings | |
5. | field, and then press the v button. |
Select a parameter to enter (IP Address, for | |
| example), and then press the v button. |
| Use the number keypad on your remote |
| control to enter the numbers for the |
| parameter. You can also enter numbers using |
| the ▲▼ buttons. Use the ◄► buttons on |
| the remote control to move from entry field |
| to entry field within a parameter. When done |
6. | with one parameter, press the v button. |
Press the ▲ or ▼ button to move to another |
Wireless Network
You can set up a wireless network connection in four ways:
When you configure the wireless network connection, any wireless network devices currently connected through the product or, if applicable, the product's current wired connection, will be disconnected.
ĞĞWireless - Automatic
1.In the Home screen, select Settings, and then press the v button.
2.Select Network, and then press the v button.
3.Select Network Settings, and then press the v button.
4.Select Wireless in the Network Settings screen, and then press the v button. The product searches for and then displays a list of the available networks.
04 Settings
parameter, and then enter the numbers for |
that parameter following the instructions in |
Step 5. |
7. Repeat Steps 5 and 6 until you have filled in |
all parameters. |
NOTE
\\ You can get the Network parameters from your Internet provider.
8. When finished entering all the parameters, |
Network Settings
Select your network type. |
|
Network type | Wireless |
Wireless network |
|
iptime23 |
|
|
|
iptime |
|
solugen_edu#2 |
|
Refresh WPS(PBC)
You can connect your Blu- ray player to the internet. Please select which wireless network to use.
select OK, and then press the v button. |
The product verifies the network connection |
and then connects to the network. |
5.Select the desired network, and then press the v button.
6.On the Security screen, enter your network's Security Code or Pass Phrase.
Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with an arrow button, and then pressing v button.
23 English
