Samsung BD-J7500/EN manual Connections, Connecting to a TV, Audio Video

Models: BD-J7500/EN

1 65
Download 65 pages 5.29 Kb
Page 11
Image 11
Connections

Connections

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.

-- Do not connect the power cord to the wall outlet until you have made all the other connections. -- When you change the connections, turn off all devices before you start.

Audio

Video

NOTES

\\ To use the Anynet+ (HDMI-CEC) function, connect the HDMI cable to the HDMI 1 terminal.

If you connect the cable to the HDMI 2 terminal, the Anynet+ (HDMI-CEC) function will not be available. -- The HDMI 2 terminal does not output a video signal.

\\ If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the DIGITAL AUDIO OUT on the product to an audio system to hear audio.

\\ An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.

\\ Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

\\ When you connect the product to your TV using an HDMI cable or to a new TV, and then turn it on for the first time, the product automatically sets the HDMI output resolution to the highest supported by the TV.

\\ A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.

\\ To view video in the HDMI 720p, 1080i, 1080p or 2160p output mode, you must use a high speed (category 2) HDMI cable.

\\ HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

03 Connections

11 English

Page 11
Image 11
Samsung BD-J7500/EN manual Connections, Connecting to a TV, Audio Video