English - 41

System Setup English
4
Press the ……††buttons to select the desired audio
option from the options described below, then press
the
OK
or √button.
5
Press the ……††buttons to select the desired item,
then press the
OK
button.
■ Press the RETURN or œbutton to return

to the previous menu.

Press the MENU button to exit the menu.
NOTE

Digital Output

• PCM : Select this when your equipment does not
decode Dolby Digital.
• Bitstream : Outputs Dolby Digital or MPEG2or DTS
audio as bitstream. Select this when your
AV receiver or AV amplifier has a Dolby
Digital or MPEG2 or DTS Decoder.

PCM Down Sampling

• On : Select this when the Amplifier connected to the
player is not 96KHz compatible.
In this case, the 96KHz signals will be down
converted to 48KHz
• Off : Select this when the Amplifier connected to the
player is 96KHz compatible. In this case, all
signals will be output without any changes.
■

LPCM sound track is always outputted as PCM.

■ Be sure to select the correct Digital Output or

you will hear no sound or a loud noise.

■

When playing a Dolby Digital movie make sure

the Digital Output is set to Bitstream.

■ If you have the unit connected via the 5.1

channel analog outputs and play a DVD Dolby

Digital or MPEG2 disc, sound will only be

heard from the Front Left and Right speakers.

■If you have the unit connected via any analog

output and play a DTS DVD disc, no sound

will be heard. To hear sound, the digital output

must be connected and set to Bitstream.

NOTE
■ Even when PCM Down Sampling is set to Off,

some discs will only output downsampled

audio though the digital outputs.

NOTE

HDMI

•If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS, MPEG), you
should set Digital Audio to PCM.
•If your TV is not compatible with LPCM sampling rates
over 48kHz, you should set PCM Down Sampling to On.
Setting up the Speaker
Options
1
With the unit in Stop mode, press the MENU
button.
2
Press the ……††buttons to select Setup, then press
the
OK
or √button.
3
Press the
……††
buttons to select Audio Setup, then
press the OK or √ button.
4
Press the
……††
buttons to select Speaker Setup,
then press the OK or √button.
BD
BD Player Setup
Memory Card
Title
Music
Photo
Setup
√√
Language Setup √√
Audio Setup √√
Display Setup √√
Parental Setup √√
BD
BD Player Audio Setup
Memory Card
Title
Music
Photo
Setup
√√
Digital Output : PCM √√
PCM Down Sampling : On √√
Dynamic Compression
: On √√
Speaker Setup √√
BD
BD Player Speaker Setup
Test Tone
L
Small
LS
Small
R
Small
Small
C
LFE
RS
Small

Dynamic Compression

This is only active when a Dolby Digital signal is detected.
•
Off : You can enjoy the movie with the standard
Dynamic Range.
•
On : When Movie soundtracks are played at
low volume or from smaller speakers, the
system can apply appropriate
compression to make low-level content
more intelligible and prevent dramatic
passages from getting too loud.
MOVE SELECT RETURN EXIT
MOVE SELECT RETURN EXIT
MOVE SELECT RETURN EXIT
A
A
A
229A_P1000_XEU_ENG_IB_39~50 9/18/06 3:56 PM Page 41