Samsung BD-P1600A/XEE, BD-P1600A/EDC, BD-P1600A/XEF manual Movie Frame 24 Fs, Video signal, Feature

display setup

Movie Frame (24 Fs)

Movies are usually filmed at 24 frames per second. Some Blu-ray Discs have the capability of playing back at this frame rate. Setting the Movie Frame (24Fs) feature to ON allows you to adjust the Blu-ray Disc Player's HDMI output to 24 frames per second for improved picture quality.

You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate.

This menu can only be selected in 1080i or 1080p HDMI output resolution modes.

	Music	System
		Language
	Photo
		Audio		TV Aspect	:	16:9 Normal
No disc	Setup	Display	◄	Movie Frame (24 Fs)	:		On
		HDMI		Resolution	:		✓ Off
		Network		Progressive Mode	:	Auto
		Parental		Still Mode	:	Auto
				Screen Message	:	On
				Front Display	:	Bright

Two types of frame rates may be included depending on the disc : Movie material (24 frame) and Video material (30 frame). When the setting switches between Movie (24 frame) and Video (30 frame), the screen may blink for a few seconds.

Resolution
Sets the output resolution of the Component and HDMI
		Music	System
video signal.
			Language		TV Aspect	:	16:9 Normal
		Photo
~ The number in 576p/480p, 576i/480i, 720p, 1080p and			Audio		Movie Frame (24 Fs)	:	Off
	No disc	Setup	Display	◄	Resolution	:		✓	1080p
1080i indicates the number of lines of video. The i and p
			HDMI		Progressive Mode	:			1080i
indicate interlace and progressive scan, respectively.			Network		Still Mode	:			720p
- BD Wise : Automatically sets the optimal resolution			Parental		Screen Message	:			576p/480p
					Front Display	:			576i/480i
when connected via HDMI to a TV with the BD Wise
feature.

(The BD Wise menu item appears only if BD Wise is set to On.)

-1080p : Outputs 1080 lines of progressive video (HDMI only).

-1080i : Outputs 1080 lines of interlaced video.

-720p : Outputs 720 lines of progressive video.

-576p/480p : Outputs 576/480 lines of progressive video.

-576i/480i : Outputs 576/480 lines of interlaced video (Component only).

If the connected TV does not support Movie Frame or the selected resolution, you will see the following message:

If you select Yes and the resolution is not supported, the TV's screen will be blank. Please wait for 15 seconds and the resolution will be reverted to the previous value automatically.

Music

Photo

No disc Setup

	System
	Language		TV Aspect	:	16:9 Normal
	Audio		Movie Frame (24 Fs)	:	Off
	If no pictures are shown after the selection,			:	1080p	►
	Display	◄	Resolution
	please wait for 15 seconds. And then,			:	Auto
!	HDMI Setup		Progressive Mode
	the resolution will be reverted
	Networktothe previous value automaticallyStillMode .			:	Auto
	Parental		Screen Message	:	On
	Would you like to make a selection?
	Yes		Front Display	:	Bright
			No

M `	If the screen is blank, press and hold the SKIP (]) button on the front of the player for more than 5
	seconds (no disc inserted). All settings are restored to the factory default. Follow the steps on the previous
	page to access each mode and select the Display Setup that your TV will support.
`	When the factory default settings are restored, all the user data stored in the BD Data will be deleted.

42_ display setup