Samsung BD-P2500/XEF PCM Down Sampling, Dynamic Compression, English, converted to 48KHz, changes

M If you have selected a LPCM soundtrack on a disc, the output will automatically be set to PCM.

Be sure to select the correct Digital Output or you will hear no sound or a loud noise.

If the HDMI device (Receiver, TV) is not compatible with compressed formats (Dolby digital, DTS), the audio signal outputs as PCM.

Secondary and Effect audio will not be heard with regular DVDs.

Some Blu-ray Discs do not have Secondary and Effect audio.

This Digital Output setup does not effect the analog (L/R) audio or HDMI audio output to your TV. It effects the optical and HDMI audio output when connected to a receiver.

When the player outputs HD audio bitstream(Dolby TrueHD or DTS-HD Master Audio) from the Optical jack to an HDMI 1.3 receiver, only 2 channel PCM audio will be heard.

If you play MPEG audio soundtracks, audio signal outputs PCM regardless of Digital Ouptut Selections(PCM or Bitstream).

PCM Down Sampling

• On : Select this when the Amplifier connected to the player			System Setup
is not 96KHz compatible. 96KHz signals will be down		Music	Language Setup	Digital Output : PCM
converted to 48KHz			Audio Setup	PCM Down Sampling : OnOn
	No Disc	Setup
• Off : Select this when the Amplifier connected to the player				Off
			Display Setup	Dynamic Compression : On
is 96KHz compatible. Signals will be output without any			HDMI Setup	Speaker Setup
			Network Setup
changes.			Parental Setup

● AUDIO SETUP

M Even when PCM Down Sampling is set to Off, some discs will only output down sampled audio through the optical digital outputs.

HDMI

•If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), the unit may output PCM 2ch down mixed audio even though you set Bitstream(either Re-encode or Audiophile) on your setup menu.

•If your TV is not compatible with PCM sampling rates over 48kHz, the unit may output 48kHz down sampled PCM audio even though you set "PCM Down Sampling" as "Off".

Dynamic Compression

This is only active when a Dolby Digital signal is detected.			System Setup	Digital Output : PCM
• Off : You can enjoy the movie with the standard Dynamic		Music	Language Setup	PCM Down Sampling : On
Range.	No Disc	Setup	Audio Setup	Dynamic Compression : On
• On : When Movie soundtracks are played at low volume or				Off
			Display Setup	Speaker Setup
			HDMI Setup
from smaller speakers, the system can apply appropriate
			Network Setup
compression to make low-level content more intelligible and			Parental Setup
prevent dramatic passages from getting too loud.

English _37