Listening through a Receiver
| You can listen to sound through a receiver instead of the TV speaker. |
|
| ||||
1 | Press the Anynet+ button. |
|
|
|
|
| |
|
| Press the ▲ or ▼ button to select Receiver, then press the | TV | P 1 |
|
| |
2 | ENTER/OK button. |
|
| View TV |
|
| |
Press the ◄ or ► button to select to On, then press the |
| Select Device | | ||||
|
| ENTER/OK button. |
|
| Record |
| |
|
| Now you can listen to sound through the receiver. |
| Menu on Device | | ||
| 3 Press the EXIT button to exit. |
| Device Operation | | |||
| ➢ When the receiver is set to On, you can listen to the TV sound |
| Receiver | :On | | ||
|
| through the |
| Setup |
| | |
| ➢ If the receiver is exclusively for a home theater only (supporting |
| Move | Enter |
| ||
|
| audio only), it may not appear in the device list. |
| Exit |
|
| |
| ➢ Only when you have connected the optical jack of the TV and |
|
|
|
| ||
|
| the receiver properly, does Receiver work. |
|
|
|
| |
| ➢ In case of a content with copyright problem, listening through the receiver may not properly operate. | ||||||
| ➢ When listening through the receiver, there are restrictions for using the PIP and | ||||||
| Check Points before Requesting Service |
|
|
| |||
|
|
|
|
|
|
| |
| Symptom | Solution |
|
|
|
| |
| Anynet+ does not work. | ■ Check if the device is an Anynet+ device. The Anynet+ system | |||||
|
|
| supports Anynet+ devices only. |
|
|
|
|
|
|
| ■ Connect only one receiver. |
|
|
|
|
|
|
| ■ Check if the Anynet+ device power cord is properly connected. | ||||
|
|
| ■ Check the Anynet+ device’s Video/Audio/HDMI cable connections. | ||||
|
|
| ■ Check whether Anynet+ | ||||
|
|
| setup menu. |
|
|
|
|
|
|
| ■ Check whether the TV remote control is in TV mode. | ||||
|
|
| ■ Check whether it is Anynet+ exclusive remote control. | ||||
|
|
| ■ Anynet+ doesn’t work at a certain condition. (Searching channels) | ||||
|
|
| ■ When connecting or removing the HDMI cable, please make sure | ||||
|
|
| to search devices again or restart your TV. |
|
| ||
|
|
| ■ Check if the Anynet+ Function of Anynet+ device is set on. | ||||
| I want to start Anynet+. | ■ Check if the Anynet+ device is properly connected to the TV and | |||||
|
|
| check if the Anynet+ | ||||
|
|
| menu. |
|
|
|
|
|
|
| ■ Press the TV button on the TV remote control to switch to TV. Then | ||||
|
|
| press the Anynet+ button to show the Anynet+ menu and select a | ||||
|
|
| menu you want. |
|
|
|
|
| I want to exit Anynet+. | ■ Select View TV in Anynet+ menu. |
|
| |||
|
|
| ■ Press the SOURCE button on the TV remote control and select a | ||||
|
|
| device other than Anynet+ devices. |
|
| ||
|
|
| ■ Press any of CH, CH LIST, and | ||||
|
|
| TV mode. (Note that the channel button operates only when a | ||||
|
|
| |||||
| The Connecting to Anynet+ | ■ You cannot use the remote control when you are configuring | |||||
| device… message appears | Anynet+ or switching to a view mode. |
|
| |||
| on the screen. | ■ Use the remote control when the Anynet+ setting or switching to | |||||
|
|
| view mode is complete. |
|
|
|
|
| The Anynet+ device does not | You cannot use the play function when Plug & Play is in progress. | |||||
| play. |
|
|
|
|
| |
| The connected device is not | ■ Check whether or not the device supports Anynet+ functions. | |||||
| displayed. | ■ Check whether or not the HDMI cable is properly connected. | |||||
|
|
| ■ Check whether Anynet+ | ||||
|
|
| setup menu. |
|
|
|
|
|
|
| ■ Search Anynet+ devices again. |
|
|
|
|
|
|
| ■ You can connect an Anynet+ device using the HDMI cable only. | ||||
|
|
| Some HDMI cables may not support Anynet+ functions. | ||||
| The TV program cannot be | Check whether the antenna jack on the recording device is properly | |||||
| recorded. | connected. |
|
|
|
| |
| The TV sound is not output | Connect the optical cable between TV and the receiver. | |||||
| through the receiver. | ||||||
|
|
|
|
|
|
English - 50