Boss Audio Systems GS-10 owner manual Controlling the Device Remotely, Setting

Chapter 8 Using the GS-10 with External MIDI Devices Connected

Controlling the Device Remotely

Making the Connections

Make the connections as shown below.

MIDI IN
MIDI OUT	EXP PEDAL
	/ CTL 1,2

*For more on the operation of the connected device, refer to the owner’s manual for the device you are using.

Setting

1.Follow the instructions in “Setting the Messages Used for Controlling Devices” (p. 75) to set the messages that are to be used for remote control.

2.Press [SYSTEM] a number of times, then press

PARAMETER [ ] [ ] so that “SYS:CTL1 Func” (or “SYS:CTL2 Func”) is displayed.

*If connecting only one foot switch, set the GS-10 so that “SYS:CTL1 Func” is indicated; if connecting two foot switches, set the GS-10 so that “SYS:CTL1 Func” or “SYS:CTL2 Func” is indicated for the corresponding foot switch.

3.Rotate the PATCH/VALUE dial to select “Remote Strt/ Stop.”

*For more on “SYS:CTL1 Func” (or “SYS:CTL2 Func”), refer to p. 59.

4.Press [EXIT] to return to the Play screen.

Each time the foot switch is pressed, it alternately sends Start and Stop.

With the GS-10, you can control external MIDI devices by combining [EXIT] and DIRECT PATCH [1]–[4].

fig.08-300

Reset Stop Play Rec

The Reset, Stop, Play, and Rec functions are assigned to DIRECT PATCH [1]–[4]. When you press these buttons while holding down [EXIT], the messages corresponding to the MIDI: Remote Ctrl setting are transmitted.

When MIDI: Remote Ctrl is set to Standard

MIDI System messages are transmitted.

Reset	No function
Stop	FC
Play	FA
Rec	No function

* Neither FA nor FC can be transmitted consecutively.

When MIDI: Remote Ctrl is set to Advanced

Some computer applications allow recording and playback functions such as Start and Stop to be assigned to specified MIDI messages.

When set to this setting, Note messages used in assigning functions are transmitted in addition to the Standard messages.

Use the software to set the operations to be performed by means of these Note messages.

Reset 90 00 01 90 05 01 90 05 00 90 00 00

Stop 90 00 01 90 02 01 90 02 00 90 00 00 FC

Play 90 00 01 90 04 01 90 04 00 90 00 00 FA

Rec 90 00 01 90 07 01 90 07 00 90 00 00

*Neither FA nor FC can be transmitted consecutively.

*Note messages are transmitted over the selected transmission channel (p. 69).

When set to MMC

MIDI Machine Control is transmitted.

Reset	F0	7F	7F	06 44 06 01 00 00 00 00 00 F7
Stop	F0	7F	7F	06 01 F7
Play	F0	7F	7F	06 02 F7
Rec	F0	7F	7F	06 06 F7

76