Chapter 2 Creating Your Own Favorite Tones (Patches)

USB (Bass):

You can add effects to the signals input from the USB connector (for sounds in the bass and similar registers). Signals from GUITAR/BASS INPUT and MIC INPUT are disregarded, and the signals input to the GS-10 from the AUX INPUT connector are mixed with the effect output.

USB

DIGITAL

 

OUT

 

 

 

L

 

 

OUTPUT

 

 

R

MULTI

D/A

GUITAR

EFFECTS

AMP OUT

 

AUX

PHONES

INPUT

 

*After setting INPUT SELECT to USB (Bass), you can press

PARAMETER [ ] to set the USB input level (p. 78).

AUX:

This setting is used when selecting the input signal from the AUX INPUT connector. Signals input from the GUITAR/BASS INPUT and MIC INPUT are disregarded, and the signals input to the GS-10 via USB are mixed with the effect output.

Setting the Mic Input Level (MIC GAIN)

This sets the mic input level when INPUT SELECT is set to Microphone.

* The mic gain setting is a global setting used by all patches.

1.Press PARAMETER [ ].

The MIC GAIN settings screen appears in the display.

2.Adjust the gain by turning the PATCH/VALUE dial while picking up sounds with the mic.

Adjust the level so that the level meter does not fluctuate beyond the maximum allowable level.

*Set the volume for the sound being miked (acoustic guitar, vocals, etc.) to the level to be used in performance.

*Setting the mic gain too high may result in oscillation.

 

DIGITAL

USB

 

OUT

GUITAR/

 

 

BASS

 

 

MIC

A/D

MULTI

EFFECTS

INPUT

 

 

AUX

 

 

INPUT

 

 

D/A

L

OUTPUT

R

GUITAR

AMP OUT

PHONES

3.Press [EXIT] to return to the Play screen.

20

Page 20
Image 20
Boss Audio Systems GS-10 owner manual Setting the Mic Input Level MIC Gain, USB Bass, Aux, Press Parameter