Boss Audio Systems GS-10 owner manual OC Octave, PB Pedal Bend, 2CE 2x2 Chorus

Chapter 4 Introduction to Effects and Parameters

*When set to BPM, the value of each parameter will be set according to the value of the Master BPM (p. 54) specified for each patch. This makes it easier to achieve effect sound settings that match the tempo of the song (synchronizing the time to twice or four times the time length of the BPM when the set time is increased).

When setting to BPM, press PARAMETER [ ] to display the Master BPM settings screen.

Feedback

This adjusts the feedback amount of the pitch shift sound.

Level

Adjusts the volume.

Direct Level

This adjusts the volume of the direct sound.

OC (Octave)

This adds a note one octave lower, creating a richer sound.

Parameter	Value
Range	Range 1–Range 4
Octave Level	0–100
Direct Level	0–100

Range

This selects the pitch range for the input sound to which you want to add the effects.

The range to which the affect is applied changes with the Input Select (p. 19) value.

	Guitar
Input	Microphone	Bass
Select	USB (Gtr/Mic)	USB
	AUX
Range 1	7th string, open (B) to	Low B, open (B) to
	1st string, 24th fret (E)	High C, 24th fret (C)
Range 2	7th string, open (B) to	Low B, open (B) to 1st
	1st string, 12th fret (E)	string, 19th fret (C)
Range 3	7th string, open (B) to	Low B, open (B) to 1st
	1st string, open (E)	string, 9th fret (E)
Range 4	7th string, open (B) to	Low B, open (B) to 2nd
	4th string, 2nd fret (E)	string, 2nd fret (E)

Octave Level

This adjusts the volume of the sound one octave below.

Direct Level

Adjusts the volume of the direct sound.

PB (Pedal Bend)

This lets you use the pedal to get a pitch bend effect.

The expression pedal automatically switches to the pedal bend function when PB is selected.

“Setting the External Expression Pedal Functions (Expression Pedal Function)” (p. 58).

Parameter	Value
Pitch Min	-24–+24
Pitch Max	-24–+24
Pdl Position	0–100
Effect Level	0–100
Direct Level	0–100

Pitch Min

This sets the pitch at the point where the expression pedal is fully lifted.

Pitch Max

This sets the pitch at the point where the expression pedal is all the way down.

Pdl Position (Pedal Position)

This adjusts the pedal position for pedal bend.

Effect Level

This adjusts the volume of the pitch bend sound.

Direct Level

Adjusts the volume of the direct sound.

2CE (2x2 Chorus)

Two separate stereo chorus units are used for the low- frequency and high-frequency ranges in order to create a more natural chorus sound.

Parameter	Value
Xover f	100 Hz–4.00 kHz
Lo Rate	0–100, BPM	–BPM
Lo Depth	0–100
Lo PreDly	0.0 msec–40.0 msec
Lo Level	0–100
Hi Rate	0–100, BPM	–BPM
Hi Depth	0–100
Hi PreDly	0.0 msec–40.0 msec
Hi Level	0–100

Section 4

45