Chapter 7 Convenient Functions and System Settings

Checking the Effect Output

Level with the Level Meter

You can meter the output level of each effect. This is handy for checking the effects’ output levels.

fig.07-130

 

 

2

 

 

3

1

1.

Press [METER].

 

fig.07-140d

 

2.Rotate the PATCH/VALUE dial to select the effect whose level you want to check.

*Effects are shown in lowercase letters when turned off.

*You can check the level of signals being input to the INPUT jack by selecting “Input.” Selecting “Output” allows you to check the level of signals output from the GS-10.

*You may not be able to achieve the effects you envision if your output levels are set too high. Adjust the output level of each of your effects to the optimum value while checking the meter and making sure the needle doesn’t swing too far to the right.

3.Press [EXIT] to return to the Play screen.

Section 7

67

Page 67
Image 67
Boss Audio Systems GS-10 owner manual Checking the Effect Output Level with the Level Meter, Press Meter