Boss Audio Systems GS-10 owner manual KnobCtl Out Knob Control Out, PC Out Program Change Out

Chapter 8 Using the GS-10 with External MIDI Devices Connected

Remote Ctrl (Remote Control)

Valid Settings: Standard, Advanced, MMC

This setting determines the MIDI messages transmitted when a MIDI sequencer or other external MIDI device is controlled with a foot switch or other controller connected to the GS-10.

Standard:

System Realtime messages are transmitted.

Advanced:

System Realtime messages and Note messages are transmitted.

MMC:

MIDI Machine Control is transmitted.

*For more details, refer to “Controlling Recorders and Sequencers Remotely from the GS-10 (Remote Control)” (p. 75).

*This is set to “Advanced” when shipped from the factory.

KnobCtl Out (Knob Control Out)

Valid Settings: Off, On

This setting determines whether or not the information describing the knob adjustments is output as System Exclusive messages.

Off:

Knob operations are not output as System Exclusive messages.

On:

Knob operations are output as System Exclusive messages.

* This is set to “On” when shipped from the factory.

PC Out (Program Change Out)

Valid Settings: Off, On

This setting determines whether or not Program Change messages are output when patches are switched on the GS- 10.

Off:

Program Change messages are not output, even when patches are switched.

On:

Program Change messages are simultaneously output when patches are switched.

* This is set to “On” when shipped from the factory.

EXP PDL Out (Expression Pedal Out)

Valid Settings: Off, 1–31, 33–95

This sets the controller number when expression pedal operation data is output as Control Change messages. When set to “Off, “Control Change messages are not output.

* This is set to “CC# 7” when shipped from the factory.

CTL1 Out (Control 1 Out)

Valid Settings: Off, 1–31, 33–95

This sets the controller number when operation data from the external pedal connected to the CTL 1 jack is output as Control Change messages. When set to “Off, “Control Change messages are not output.

* This is set to “Off” when shipped from the factory.

CTL2 Out (Control 2 Out)

Valid Settings: Off, 1–31, 33–95

This sets the controller number when operation data from the external pedal connected to the CTL 2 jack is output as Control Change messages. When set to “Off, “Control Change messages are not output.

* This is set to “Off” when shipped from the factory.

70