Installing & Setup the USB Driver

In order to use the GS-10 USB, you must first install the USB driver.

The USB Driver is included in the “GS-10 SOFTWARE CD-ROM.”

What is USB Driver?

The USB Driver is software which passes data between the GS-10 and the application (sequencer software etc.) that is running on the USB-connected computer.

The GS-10 Driver sends data from the application to the GS-10, and passes data from the GS-10 to the application.

The GS-10 can receive and transmit both digital audio signals and MIDI messages.

Application

USB connector

USB

Driver

USB cable

Computer

GS-10

The explanation about installing and setup the driver is organized according to the computer and driver mode that you are using. Please proceed to the following pages.

Installing & Setting Up the Driver (Windows)

(p. 126)

Installing & Setting Up the Driver (Macintosh)

(p. 146)

125

Page 125
Image 125
Boss Audio Systems owner manual What is USB Driver?, Computer GS-10