Installing & Setting Up the Driver (Macintosh)

8. In the Output tab, set “Choose a device for sound output” to “GS-10.”

fig.11-700

The “Main Volume” slider will

not move.

9.In the Input tab, set “Choose a device for sound input” to “GS-10.”

fig.11-710

Cautions when using the GS-10

Before you use your software, please note the following points.

Select “GS-10” in the audio driver setting of your software. For details, refer to the manual that came with your software.

Connect the GS-10 to your computer via a USB cable before you start up your sequencer or other software.

Do not disconnect the USB cable from the GS-10 while your sequencer or other software is running.

Disconnect the USB cable from the GS-10 only after you have quit your sequencer or other software.

Leave the Sleep function of your Macintosh turned off.

The GS-10 will not work in the Classic environment of Mac OS X. Use the GS-10 when the Classic environment is not running.

161

Page 161
Image 161
Boss Audio Systems owner manual 161, Output tab, set Choose a device for sound output to GS-10