Chapter 6 Setting the External Pedal Functions

Setting the External Pedal Function for Individual Patches (Assign)

There are two ways to set the assignments, “Quick Settings,” which allows you to use [QUICK FX] to complete the settings quickly and easily, and “Manual Settings,” where each parameter is set one at a time.

Quick Settings

When you use [QUICK FX] to select prepared settings (Preset settings), the relevant parameters are then instantly set to their optimal values. This lets you finish making the settings simply, instead of setting each individual parameter separately.

5 2

1,3 4

1.Press [ASSIGN].

2.Press PARAMETER [ ] [ ] to select one of the Assigns from Assign 1–8.

3.Press [ASSIGN] to set the selected Assign to “On.” Each time [ASSIGN] is pressed it alternately switches this on and off. “ASSIGN” flashes in the display when the Assign is switched off.

* Always set any Assign to “Off” when it is not being used.

4.Press [QUICK FX].

The Preset settings selection screen appears in the display.

*The following appears when the Quick Settings are changed through editing of parameters immediately after the patches are changed.

5.Turn the PATCH/VALUE dial to select the Preset settings.

6.To use the Quick Settings with other Assigns, repeat Steps 2–5.

Even when using this procedure, the settings selected in Step 5 are maintained as is and carried over to the Quick Settings for the next effect.

7.To save the settings, use the Write procedure (p. 25). Press [EXIT] to return to the Play screen.

Preset Settings

P01

PEDAL WAH

The expression pedal functions as

a wah pedal.

 

 

 

 

 

P02

PEDAL BEND

The expression pedal is used for

pedal bend.

 

 

 

 

 

P03

FOOT VOLUME

The expression pedal functions as

a volume pedal.

 

 

 

 

 

P04

COMP ON/OFF

The compressor is switched on

and off with the foot switch.

 

 

 

 

 

P05

OD/DS ON/OFF

The overdrive/distortion is

switched on and off with the foot

 

 

switch.

 

 

 

P06

DELAY ON/OFF

The delay is switched on and off

with the foot switch.

 

 

 

 

 

P07

CHRUS ON/OFF

The chorus is switched on and off

with the foot switch.

 

 

 

 

 

P08

FX-1 ON/OFF

FX-1 is switched on and off with

the foot switch.

 

 

 

 

 

P09

FX-2 ON/OFF

FX-2 is switched on and off with

the foot switch.

 

 

 

 

 

P10

DLY TIME TAP

The foot switch is used for tap in-

put of the delay time.

 

 

 

 

 

P11

MSTR BPM TAP

The foot switch is used for tap in-

put of the Master BPM.

 

 

 

 

 

P12

CH SEL INC

The foot switch is used for switch-

ing the preamp/speaker channel

 

 

select (A B C A ...).

 

 

 

*The foot switch function is enabled for the foot switch connected to CTL 1.

60

Page 60
Image 60
Boss Audio Systems GS-10 owner manual Quick Settings, Preset Settings