Chapter 2 Creating Your Own Favorite Tones (Patches)

Naming Patches

Each patch can be given a name (Patch Name) consisting of up to sixteen characters. You’ll probably want to take advantage of this feature by assigning names that suggest the sound you’ll obtain, or the song in which it’ll be used.

3

2

3

1

1.Press [NAME/NS/MASTER] so that the Name edit screen appears in the display.

*With each press of [NAME/NS/MASTER], you move to the next item that can be set, in this order:

Name Noise Suppressor Master Foot Volume Effect Chain.

2.Press PARAMETER [ ] [ ] to move the cursor to the text area you want to edit.

3.Rotate the PATCH/VALUE dial to change the characters.

*You can use the following functions when changing text characters.

CAPS: Switches the character at the cursor position between upper and lower case.

INS: Inserts a blank space at the cursor position.

DEL: Deletes the character at the cursor position and shifts the characters following it to the left.

4.If you want to edit names further, repeat Steps 2 and 3.

5.If you want to save the sequence you’ve set up, use the Write procedure (p. 25) to save it to a User patch.

Press [EXIT] to return to the Play screen.

Changing the Connection Order of Effects (Effect Chain)

Here’s how you can change the order in which the effects are connected.

2

2

31

1.Press [NAME/NS/MASTER] until “Effect Chain” appears in the display.

*With each press of [NAME/NS/MASTER], you move to the next item that can be set, in this order:

Name Noise Suppressor Master Foot Volume Effect Chain.

*Effects are shown in lowercase letters when turned off.

2.Use the PATCH/VALUE dial or PARAMETER [ ]

[ ] to move the cursor to the point where you want to have an effect inserted.

3.Press the On/Off button for the effect you want to insert.

The selected effect is inserted at the cursor position.

* Use [ASSIGN] to assign Foot Volume.

4.If you want to change the sequence further, repeat Steps 2 and 3.

5.If you want to save the sequence you’ve set up, use the Write procedure (p. 25) to save it to a User patch.

Press [EXIT] to return to the Play screen.

Effects can be switched on and off even while making the settings for the connection order (excluding FV, NS, and USB).

With effects appearing to the left and right of the cursor, the ON/OFF button corresponding to the effect can be pressed to turn them on/off.

24

Page 24
Image 24
Boss Audio Systems GS-10 owner manual Naming Patches, Changing the Connection Order of Effects Effect Chain