Boss Audio Systems GS-10 owner manual Storing Patches Patch Write, Copying Patches, Press Write

Chapter 3 Saving the Tones You Have Created

Storing Patches (PATCH WRITE)

When you want to keep a tone created with the Quick Settings or a tone with altered parameter values, use the “Write procedure” to save it to a User patch.

*If the power is turned off, or if the tone is switched (Patch Change; p. 18) before you’ve carried out the Write procedure, the newly created tone will be discarded.

fig.03-010
	2
	1,3
1.	Press [WRITE].

The screen for specifying the save-destination User patch appears in the display.

fig.03-020d

Save-destination patch

2.Rotate the VALUE dial to select the save-destination User patch.

*This step is unnecessary if the current User patch is acceptable.

*To cancel the Write procedure, press [EXIT]. The Play screen returns to the display.

3.Press [WRITE].

The GS-10 switches to the write-destination patch, and you’re returned to the Play screen.

*The sound of the patch previously stored at the write destination will be lost once the write is executed.

Copying Patches

You can copy a Preset or User patch to another User patch.

fig.03-030
3
2,4	Section 3

1.Select the copy-source patch (refer to “How to Switch Patches”; p. 18).

2.Press [WRITE].

The screen for specifying the copy-destination patch

number appears in the display.

fig.03-040d

Copy-destination patch

3.Rotate the PATCH/VALUE dial to select the copy- destination User patch.

*To cancel the copy, press [EXIT]. The Play screen returns to the display.

4.Press [WRITE].

The GS-10 switches to the copy-destination patch, and you’re returned to the Play screen.

*The sound of the patch previously stored at the copy destination will be lost once the copy is executed.

25