Boss Audio Systems GS-10 owner manual Installing & Setting Up the Driver Macintosh 155

Click [Install] or [Update].

The display will indicate “Installing this software requires you to restart...”. fig.11-600

7.

Click the drive on which the system is installed, then click [Continue]. The display will indicate “Easy Install.”

fig.11-590

6.

Click [Continue].

The display will indicate “Select a Destination.”

5.

The “Authenticate” dialog box will appear; type your password and click “OK.” The display will indicate “Welcome to the GS-10 USB Driver Installer.”

fig.11-570

4.

Disconnect all USB cables except for a USB keyboard and USB mouse (if used).

2. Insert the CD-ROM into the CD-ROM drive.

3. Double-click the “GS10USBDriver” icon (found in the Driver (Mac OS X) of the CD-ROM).

In case of Mac OS X v10.1.5, the display will indicate “Authorization,” then click on the key symbol. fig.11-560

With the GS-10 disconnected, start up Mac OS.

1.

Mac OS X users

■

Installing & Setting Up the Driver (Macintosh)

155