Chapter 9 Using the GS-10 Connected to a Computer Via USB

Before Connecting with USB

With the GS-10, you can use USB to transmit both digital audio signals and MIDI messages between the GS-10 and your computer.

This requires installation of a USB driver on your computer so that it can work with the GS-10’s driver mode settings.

For instructions on installing the driver, please read “Installing & Setup the USB Driver” (p. 125).

fig.09-009

Computer

Driver Mode

The GS-10 features two operational modes, one mode that uses the special driver on the CD-ROM included with the GS-10 and another mode that uses the operating system’s (Windows/Mac OS) standard drivers.

The special driver provides high-quality sound and stable timing for audio recording, playback, and editing.

In addition, the driver enables you to control the GS-10 with MIDI messages and connect external MIDI devices to your computer.

Setting USB-Related Functions

Adjusting the Recording Level (Output Level)

This adjusts the volume level of the digital audio output to the USB and DIGITAL OUT connectors.

1.Press [USB].

2.Press PARAMETER [ ] [ ] so that “Out Levl” is

displayed.

fig.09-010d

3.Rotate the PATCH/VALUE dial to set the output level.

4.Press [EXIT] to return to the Play screen.

Adjusting the Playback Volume Level (Input Level)

This adjusts the volume level of the digital audio input from the USB connector.

1.Press [USB].

2.Press PARAMETER [ ] [ ] so that “Input

Level” is displayed.

fig.09-020d

3.Rotate the PATCH/VALUE dial to set the input level.

4.Press [EXIT] to return to the Play screen.

78

Page 78
Image 78
Boss Audio Systems GS-10 owner manual Before Connecting with USB, Setting USB-Related Functions, Driver Mode