Boss Audio Systems GS-10 owner manual UV Uni-V, RT Rotary

Chapter 4 Introduction to Effects and Parameters

Depth

This adjusts the depth of the vibrato.

Trigger

This selects on/off of the vibrato.

*It is assumed that this parameter will be assigned (p. 60) to the foot switch.

Rise Time

This sets the time passing from the moment the trigger is turned on until the set vibrato is obtained.

UV (Uni-V)

Although this resembles a phaser effect, it also provides a unique undulation that you can’t get with a regular phaser.

Parameter	Value
Rate	0–100, BPM –BPM
Depth	0–100
Level	0–100

Rate

Adjusts the rate of the Uni-V effect.

*When set to BPM, the value of each parameter will be set according to the value of the Master BPM (p. 54) specified for each patch. This makes it easier to achieve effect sound settings that match the tempo of the song (synchronizing the cycle to one-half or one-fourth of the BPM when the set cycle rate is increased).

When setting to BPM, press PARAMETER [ ] to display the Master BPM settings screen.

Depth

Adjusts the depth of the Uni-V effect.

Level

Adjusts the volume.

RT (Rotary)

This produces an effect like the sound of a rotary speaker.

Parameter	Value
Speed Sel	Slow, Fast
Rate (Slow)	0–100, BPM	–BPM
Rate (Fast)	0–100, BPM	–BPM
Rise Time	0–100
Fall Time	0–100
Depth	0–100

Speed Sel (Speed Select)

This parameter changes the simulated speaker’s rotating speed (Slow or Fast).

Rate (Slow)

This parameter adjusts the speed of rotation when set to “Slow.”

Rate (Fast)

This parameter adjusts the speed of rotation when set to “Fast.”

*When the Rate (Slow) or Rate (Fast) set to BPM, the value of each parameter will be set according to the value of the Master BPM (p. 54) specified for each patch. This makes it easier to achieve effect sound settings that match the tempo of the song (synchronizing the cycle to one-half or one-fourth of the BPM when the set cycle rate is increased).

When setting to BPM, press PARAMETER [ ] to display the Master BPM settings screen.

Rise Time

This parameter adjusts the time it takes for the rotation speed to change when switched from “Slow” to “Fast.”

Fall Time

This parameter adjusts the time it takes for the rotation speed to change when switched from “Fast” to “Slow.”

Depth

This parameter adjusts the amount of depth in the rotary effect.

Section 4

47