Boss Audio Systems GS-10 owner manual Target Range, When using the foot switch

Chapter 6 Setting the External Pedal Functions

*Although you can set this so that the same target is controlled by more than one controller, in such cases, make sure not to have different sources changing the parameter at the same time. Changing the parameter simultaneously using different sources may result in noise being generated.

Target Range

The value of the parameter selected as the target changes within the range defined by “Min” and “Max,” as set on the GS-10.

When using an external foot switch, or other controller that acts as an on/off switch, “Min” is selected with Off (CLOSED), and “Max” is selected with On (OPEN).

When using an external expression pedal or other controller that generates a consecutive change in the value, the value of the setting changes accordingly, within the range set by the minimum and maximum values.

Also, when the target is of an on/off type, the median value of the received data is used as the dividing line in determining whether to switch it on or off.

When using the foot switch:

Amount of change in parameter value

maximum value Target Max

minimum value Target Min

Off On

Release Depress

Foot Switch

When using the expression pedal:

maximum value Target Max

minimum value
Target Min
When the pedal	When the pedal
is fully raised	is fully advanced

Expression Pedal

When controlling the On/Off target with the expression pedal:

On

Target Max

		On
Off
Target Min	Off
When the pedal	When the pedal		When the pedal
is fully raised	is advanced halfway		is fully advanced

Expression Pedal

*The range that can be selected changes according to the target setting.

*When the “minimum” is set to a higher value than the “maximum,” the change in the parameter is reversed.

*The values of settings can change if the target is changed after the “minimum” and “maximum” settings have been made. If you’ve changed the target, be sure to recheck the “minimum” and “maximum” settings.

62