Chapter 4 Introduction to Effects and Parameters

EDIT CUSTOM SP 1 –2

Parameter

Value

Speaker Size

5”–15”

Color Low

-10–+10

Color High

-10–+10

Speaker Num

x1, x2, x4, x8

Cabinet

Open, Close

Mic Type

This setting selects the simulated mic type.

DYN57

General dynamic mic used for instruments

and vocals. Optimal for use in miking gui-

 

tar amps.

 

 

DYN421

Dynamic mic with extended low end.

 

 

CND451

Small condenser mic for use with instru-

ments.

 

 

 

CND87

Condenser mic with flat response.

 

 

 

Simulates a mic with perfectly flat re-

FLAT

sponse. Produces a sonic image close to

that of listening to the sound directly from

 

 

the speakers (on site).

 

 

Mic Dis. (Mic Distance)

Simulates the distance between the mic and speaker.

Off Mic:

This setting points the mic away from the speaker.

On Mic:

Provides conditions whereby the mic is directed more towards the speaker.

Mic Pos. (Mic Position)

This simulates the microphone position. “Center” simulates the condition that the microphone is set in the middle of the speaker cone. “1-10” means that the microphone is moved away from the center of the speaker cone.

Mic Level

Adjusts the volume of the microphone.

Direct Level

Adjusts the volume of the direct sound.

COMP (Compressor)

This is an effect that produces a long sustain by evening out the volume level of the input signal. You can also use it as a “limiter” to suppress only the sound peaks and prevent distortion.

ParameterValue

On/Off

Off, On

Sustain0–100

Level0–100

On/Off (Effect On/Off)

Turns the COMP effect on/off.

Sustain

Adjusts the range (time) over which low-level signals are boosted. Larger values will result in longer sustain.

Level

Adjusts the volume.

Section 4

31

Page 31
Image 31
Boss Audio Systems GS-10 owner manual Comp Compressor