Chapter 3 Saving the Tones You Have Created

Registering Your Favorite Patches (DIRECT PATCH)

You can register preferred patches to DIRECT PATCH [1]–[4] and then press these buttons to call up the corresponding patches directly.

fig.03-070

 

3

2

4

1

1.Press [SYSTEM] a number of times until “DIRECT

PATCH” is displayed.

fig.03-080d

2.Press PARAMETER [ ] [ ] to select the number of the DIRECT PATCH button to which you want to

register the patch.

3.Use the PATCH/VALUE dial to select the patch you want to register.

4.Press [EXIT] to return to the Play screen.

You can also register patches by selecting the patch in the Play screen, then pressing one of the DIRECT PATCH [1]–[4] buttons after pressing the [WRITE] button. In this case, the patch appearing in the display is registered.

*When a patch is registered using this method, the current settings are also saved along with the patch when it’s registered. If you want to register only the patch, use the regular registration method.

Copying the PREAMP/SPEAKER Settings to Another Channel

You can take the PREAMP/SPEAKER settings for one channel and copy them to another channel.

fig.03-090

1,3

Section 3

2,4

1.Select the copy-source channel.

2.Press [WRITE].

3.Press CHANNEL SELECT [A]–[C] to select the copy- destination channel.

The channel copy screen appears in the display.

*If you press the button for the same channel as the copy source, a channel other than the copy-source channel is selected for the

copy destination.

fig.03-100d

Copy-source channel

Copy-destination channel

*To change the copy-source or copy-destination channel, press

PARAMETER [ ] [ ] to move the cursor to the copy- source or copy-destination channel, then press CHANNEL

SELECT [A]–[C].

You can alternatively rotate the PATCH/VALUE dial to change the channel at the cursor position.

*When the copy-source channel is changed, the tone is changed as well.

*To cancel the copy, press [EXIT]. The Play screen returns to the display.

4.Press [WRITE].

The settings are copied.

*If you want to keep a tone for which you have made settings, use the “Write procedure” (p. 25) to save it to a User patch.

27

Page 27
Image 27
Boss Audio Systems GS-10 owner manual Registering Your Favorite Patches Direct Patch