Chapter 1 Playing Sounds

Making the Connections

fig.01-010

Mic

or

Computer

AC Adaptor (BRC series)

Guitar

or

Bass

Guitar Amp

Foot Switch

(FS-5U, etc.)

Stereo Headphones

Expression Pedal

Mixer

(Roland EV-5, etc.)

*To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.

*Turn up guitar amp and audio amp volume levels and the GS- 10’s OUTPUT LEVEL only after turning on the power to all connected devices.

To prevent the inadvertent disruption of power to your unit (should the plug be pulled out accidentally), and to avoid applying undue stress to the AC adaptor jack, anchor the power cord using the cord hook, as shown in

the illustration.

fig.01-020

This instrument is equipped with balanced (XLR/TRS) type MIC INPUT jacks. Wiring diagrams for these jacks are shown below. Make connections after first checking

the wiring diagrams of other mic you intend to connect.

fig.01-021

*Not compatible with phantom power.

Howling could be produced depending on the location of mics relative to speakers. This can be remedied by:

1.Changing the orientation of the mic(s).

2.Relocating mic(s) at a greater distance from speakers.

3.Lowering volume levels.

14

Page 14
Image 14
Boss Audio Systems GS-10 owner manual Playing Sounds, Making the Connections