For details on settings, refer to the manual that came with your software.
Next, you need to install the ASIO driver (p. 154).
150
Make MIDI device settings on your sequencer software.
15.
After you have verified this, and exit OMS Setup.
14.
From the Studio menu, choose [Test Studio]. fig.11-470
13. If a MIDI sound module is connected to the GS-10’s MIDI OUT connector, click the GS-10 MIDI IN,OUT icon in the Studio Setup window.
If you hear sound, the settings have been made correctly. fig.11-480
* GS-10 MIDI IN,OUT corresponds to the GS-10’s MIDI IN,MIDI OUT. GS-10 CONTROL corresponds to the GS-10’s control port.
Verify that MIDI transmission and reception occur correctly.
12.
Installing & Setting Up the Driver (Macintosh)
11. From the Edit menu, select “OMS MIDI Setup”. In the OMS MIDI Setup dialog box that appears, check “Run MIDI in background,” and click [OK].
fig.11-460

If a MIDI sound module is connected to the GS-10, the following step will cause a relatively loud sound to be produced by the sound module, so it is a good idea to turn down the volume on the sound module first.

Page 150
Image 150
Boss Audio Systems GS-10 owner manual