Chapter 8 Using the GS-10 with External MIDI Devices Connected

Enabling/Disabling the Program Change Map Settings (MIDI Map Select)

This setting determines whether patches are switched according to the Program Change Map settings, or to the default settings.

1.Press [SYSTEM], then press PARAMETER [ ]

[ ] so that “MIDI:Map Select” is displayed.

2.Rotate the PATCH/VALUE dial to select “Fix” or “Prog.”

Fix:

Switches to the patches according to the default settings. For more on the default settings, refer to “Initial Program Change Map settings” (p. 73).

Prog:

Switches to the patches according to the Program Change Map.

3.Press [EXIT] to return to the Play screen.

Changing Patch Numbers on an External MIDI Device From the GS-10

When patches are switched with the GS-10, a Program Change message is transmitted. The correspondence between the GS-10’s initial bank and patch numbers and the transmitted Program Change messages is shown in the table below.

 

Program Change

Patch Number

 

 

Bank

Program

 

Select

Number

 

 

 

U001

 

1

 

 

 

U002

 

2

 

 

 

U003

 

3

 

 

 

:

0

:

 

 

:

:

 

 

 

 

U098

 

98

 

 

 

U099

 

99

 

 

 

U100

 

100

 

 

 

P101

 

1

 

 

 

P102

 

2

 

 

 

P103

 

3

 

 

 

:

1

:

 

 

:

:

 

 

 

 

P198

 

98

 

 

 

P199

 

99

 

 

 

P200

 

100

 

 

 

74

Page 74
Image 74
Boss Audio Systems GS-10 owner manual Fix, Program Change, Patch Number Bank Program Select