Installing & Setting Up the Driver (Windows)

9.In the dialog box that appears, input the following into the “Open” field, and click [OK].

D:\DRIVER\USB_XP2k\SETUPINF.EXE

* The drive name “D:” may be different for your system. Specify the drive name of your CD-ROM drive.

fig.11-030

The “SetupInf” dialog box will appear, with “Ready to install the driver” appearing in the box.

fig.11-040

10.Before connecting the USB cable, switch the GS-10’s driver mode to “Advanced.”

For instructions on switching the GS-10’s driver modes, refer to “Switching the Driver Mode” (p. 80).

11.With the power switch turned OFF, use the USB cable to connect the GS-10 to your computer.

12.Make sure that the GS-10’s OUTPUT LEVEL is set to the lowest setting, then switch ON the POWER switch.

The “Found New Hardware Wizard” will appear.

fig.11-050

13.Make sure that the screen indicates “BOSS GS-10”, select “Install from a list or specific location (Advanced)”, and click [Next].

The screen will indicate “Please choose your search and installation options”.

In this manual, the location of folders and files is given in terms of the file path, using \ as the delimiter. For example, WinXP_2k\SETUPINF.EXE indicates the SETUPINF.EXE file found in the WinXP_2k folder.

Turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to other devices.

This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.

128

Page 128
Image 128
Boss Audio Systems GS-10 owner manual 128, DRIVER\USBXP2k\SETUPINF.EXE