Boss Audio Systems GS-10 owner manual Installing the special driver, Windows XP/2000 users, 127

Installing & Setting Up the Driver (Windows)

Installing the special driver

The installation procedure will differ depending on your system.

Please proceed to one of the following sections, depending on the system you use.

•Windows XP/2000 users.............. (p. 127)

•Windows Me/98 users ................. (p. 135)

■Windows XP/2000 users

Windows XP

1.With the GS-10 disconnected, start up Windows.

Disconnect all USB cables except for a USB keyboard and USB mouse (if used).

2.Open “Control Panel” from the Windows Start menu, then open the “System Properties” dialog.

3.Click “Hardware” tab, and then click [Driver Signing].

Open the “Driver Signing Options” dialog box.

fig.11-020

If you are using Windows XP Professional, you must log on using a user name with an administrative account type (e.g., Administrator).

Depending on how your system is set up, the System icon may be displayed directly in the Control Panel (the Classic display). In this case, double-click the System icon.

4.Make sure that “What action do you want Windows to take?” is set to “Ignore”.

If currently set to “Warn” or “Block,” set it to “Ignore” here, then after installing the driver, restore

the original setting.

5.Click [OK] to close the “System Properties” dialog box.

6.Exit all currently running software (applications).

Also close any open windows. If you are using virus checking or similar software, be sure to exit it

as well.

7.Insert the CD-ROM into the CD-ROM drive of your computer.

8.Click the Windows start button. From the menu that appears, select “Run...”.

Open the “Run...” dialog box.

127