Chapter 4 Introduction to Effects and Parameters

Xover f (Crossover Frequency)

This parameter sets the frequency at which the frequency components of the direct sound are divided into bass and treble bands.

Lo Rate (Low Rate)

Adjust the speed of the chorus effect for the low frequency range.

*When set to BPM, the value of each parameter will be set according to the value of the Master BPM (p. 54) specified for each patch. This makes it easier to achieve effect sound settings that match the tempo of the song (synchronizing the cycle to one-half or one-fourth of the BPM when the set cycle rate is increased).

When setting to BPM, press PARAMETER [ ] to display the Master BPM settings screen.

Lo Depth (Low Depth)

Adjust the depth of the chorus effect for the low frequency range. If you wish to use this as a doubling effect, use a setting of “0.”

Lo PreDly (Low Pre Delay)

Adjust the time from when the low frequency range direct sound is output until the effect sound is output. Extending the pre-delay will produce the sensation of multiple sounds (doubling effect).

Lo Level (Low Level)

Adjust the volume of the low frequency range.

Hi Rate (High Rate)

Adjust the speed of the chorus effect for the high frequency range.

*When set to BPM, the value of each parameter will be set according to the value of the Master BPM (p. 54) specified for each patch. This makes it easier to achieve effect sound settings that match the tempo of the song (synchronizing the cycle to one-half or one-fourth of the BPM when the set cycle rate is increased).

When setting to BPM, press PARAMETER [ ] to display the Master BPM settings screen.

Hi Depth (High Depth)

Adjust the depth of the chorus effect for the high frequency range. If you wish to use this as a doubling effect, use a setting of “0.”

Hi PreDly (High Pre Delay)

Adjust the time from when the high frequency range direct sound is output until the effect sound is output. Extending the pre-delay will produce the sensation of multiple sounds (doubling effect).

Hi Level (High Level)

Adjust the volume of the high frequency range.

PAN

With the volume level of the left and right sides alternately changing, when playing sound in stereo, you can get an effect that makes the guitar sound appear to fly back and forth between the speakers.

Parameter

Value

Wave Shape

0–100

Rate

0–100, BPM –BPM

Depth

0–100

Wave Shape

This adjusts changes in volume level.

Rate

Adjusts the frequency (speed) of the change.

*When set to BPM, the value of each parameter will be set according to the value of the Master BPM (p. 54) specified for each patch. This makes it easier to achieve effect sound settings that match the tempo of the song (synchronizing the cycle to one-half or one-fourth of the BPM when the set cycle rate is increased).

When setting to BPM, press PARAMETER [ ] to display the Master BPM settings screen.

Depth

Adjusts the depth of the effect.

VB (Vibrato)

This effect creates vibrato by slightly modulating the pitch.

Parameter

Value

Rate

0–100, BPM –BPM

Depth

0–100

Trigger

Off, On

Rise Time

0–100

Rate

This adjusts the rate of the vibrato.

*When set to BPM, the value of each parameter will be set according to the value of the Master BPM (p. 54) specified for each patch. This makes it easier to achieve effect sound settings that match the tempo of the song (synchronizing the cycle to one-half or one-fourth of the BPM when the set cycle rate is increased).

When setting to BPM, press PARAMETER [ ] to display the Master BPM settings screen.

46

Page 46
Image 46
Boss Audio Systems GS-10 owner manual VB Vibrato