Installation
7. Installation of a lightshield
DFB lightshield (optional accessory)
Follow the installation instructions supplied with the DFB lightshield. Use the screws supplied with the lightshield.
Custom made lightshield
^ Stick the three lengths of double sided tape to the custom lightshield and stick it to the deflector plate handle as shown above.
^Fit the deflector plate handle into the openings on the deflector plate.
^Secure the handle in place with the 2 screws (3.0 x 15 mm) through the underside of the deflector plate.
^Dismantle the deflector plate handle with the attached lightshield.
^Secure the lightshield to the deflector plate handle using (5) 3.0 x 15 mm screws, two at either side and one in the middle.
^Reattach the lightshield to the deflector plate.
33
