Installation
12. Light cover
^ Pull the deflector plate slightly out. |
^Tilt the front of the external filter slightly down and out.
^Insert the two holders on to the sides of the light cover.
^Secure the light cover using (2) 3.5 x 9.5 mm
Reinserting the external filter:
^Remove the protective film from the the filter frame.
^Make sure that the red plastic guides are at the front and facing up.
^Insert the external filter into the extended deflector plate from below and hold it in position.
^Push the filter gently upwards and push the deflector plate in. The filter will slide into the holders.
^Push the filter backwards so it snaps into place.
36