Installation
3. Runners
^Cabinet width 60 cm:
Install the runners on the left and right side of the cabinet with (4)
3.5 x 16 mm screws on each side. If the side panels are 5/8" (16 mm) thick, use the bracket side with the
marker "16 mm".
If the side panels are 3/4" (19 mm) thick, turn the bracket and use the side with the marker "19 mm".
Note: Please refer to the "Special installation instructions" at the end of this section for instructions on installing the appliance into a 27 9/16" (70 cm) or 35 7/16" (90 cm) wide cabinet.
The measure "x" will depend on the type of lightshield used.
The Miele DFB lightshield (optional accessory) sits flush with the cabinet front.
The runner’s adjustable range allows the hood position to be adjusted by
± 9/16" (15 mm).
Hood installed with a cabinet matching light shield (custom made)
31
