Miele DA326-1I Installation, Non-returnflap, Reducing collar, Air extraction, Recirculation mode

Installation

1. Non-return flap 2. Reducing collar

Air extraction

^Insert the non-return flap into the vent socket so the flaps open upward. (This is not necessary if the ducting system is already fitted with a non return flap, e.g. wall vent).

Recirculation mode

When used in recirculation mode a non-return flap it is not necessary.

Air extraction

The appliance is designed for 6" (150 mm) diameter ducting.

If a 5" (125 mm) diameter is required:

^Place the supplied reducing collar on the vent socket (see "Connection for air extraction").

Recirculation mode

^Place the reducing collar for a 5" (125 mm) diameter on the vent socket as previously described.

30