![b 1 reducing collar](/images/new-backgrounds/65397/6539757x1.webp)
Installation
a 2 hose clips for securing the vent ducting to the vent connection
b 1 reducing collar
for exhaust ducting of 5" (125 mm) diameter
c 1
for fitting into the vent connection
d 2 runners
(1 x right, 1x left) to support the hood in the cabinet
e 2 spacer blocks (DA
f 2 side spacers to conceal gaps when installing in a 24" (60 cm) wide cabinet
g Active Charcoal Filter Slot
h Deflector plate handle for the front panel
i 1 spacer strip to conceal the gap between the rear of the appliance and the wall
j 1 light cover
with right and left holders k.
8 screws 3.5 x 16 mm for installing the runners and spacer blocks
6
3.5x 9.5 mm for installing the light and spacer strips
6 knurled screws
for securing and adjusting the hood
7 screws
3.0x 15 mm for installing the light shield
1 adhesive strip with 3 sections
for attaching a decorative piece to the deflector plate handle i
Screwdriver
for aligning the cabinet door after the appliance has been installed
29