Boss Audio Systems GS-10 owner manual Selecting the Input Input Select

Chapter 2 Creating Your Own Favorite Tones (Patches)

Selecting the Input (INPUT SELECT)

This selects the input signal to which the effects are added. This is also used for setting the type of device connected to the input connector.

Bass:

You can add effects to the signals input from the GUITAR/BASS jack (when a bass is connected). Signals from MIC INPUT are disregarded, and the signals input to the GS-10 from the USB or AUX INPUT connectors are mixed with the effect output.

To derive the maximum performance from the GS-10, be sure to make the correct setting for INPUT SELECT, the one that’s most suitable for your setup.

You may not be able to achieve the expected effect if this is not set correctly.

fig.02-051

fig.02-080

GUITAR/

BASS

MIC INPUT

AUX

INPUT

DIGITAL

OUT USB

A/D	MULTI
	EFFECTS

	L
	OUTPUT
	R
D/A	GUITAR
	AMP OUT
	PHONES

Section 2

2

1

1.Press [INPUT SELECT].

The Input Select settings screen appears.

fig.02-060d

2.Turn the PATCH/VALUE dial to change the settings.

Guitar:

You can add effects to the signals input from the GUITAR/BASS INPUT connector (when a guitar is connected). Signals from MIC INPUT are disregarded, and the signals input to the GS-10 from the USB or AUX INPUT connectors are mixed with the effect output.

*Depending on the type of bass guitar you are using, you may not be able to achieve the intended effect if the input level to the GS-10 is excessively high.

In such cases, lower the volume or tone of your bass guitar.

Microphone:

You can add effects to the signals input from the MIC INPUT connector. Signals from GUITAR/BASS jack are disregarded, and the signals input to the GS-10 from the USB or AUX INPUT connectors are mixed with the effect

output.

fig.02-090
	DIGITAL	USB
	OUT
GUITAR/				L
				OUTPUT
BASS
				R
MIC	A/D	MULTI	D/A	GUITAR
		EFFECTS		AMP OUT
INPUT
AUX				PHONES
INPUT

*After setting INPUT SELECT to Microphone, you can press

PARAMETER [ ] to set the mic gain (p. 20).

USB (Gtr/Mic):

You can add effects to the signals input from the USB connector (for sounds in the guitar and vocal registers). Signals from GUITAR/BASS and MIC INPUT are disregarded, and the signals input to the GS-10 from the

AUX INPUT connector are mixed with the effect output.

fig.02-100

fig.02-070

GUITAR/

BASS

MIC INPUT

AUX

INPUT

DIGITAL

OUT USB

A/D	MULTI
	EFFECTS

	L
	OUTPUT
	R
D/A	GUITAR
	AMP OUT
	PHONES

USB	DIGITAL
	OUT
		L
		OUTPUT
		R
MULTI	D/A	GUITAR
EFFECTS		AMP OUT

AUX	PHONES
INPUT

*After setting INPUT SELECT to USB (Gtr/Mic), you can

press PARAMETER [ ] to set the USB input level (p. 78).

19