Chapter 3 Saving the Tones You Have Created

Exchanging Patches

On the GS-10, you can “swap” or exchange the positions of two User patches. The following explains how this is done.

4

3

2,5

1.Select the exchange source patch.

* Refer to “Patch Change” (p. 18).

2.Press [WRITE].

3.Press PARAMETER [ ].

The screen for specifying the exchange-destination patch number appears in the display.

Exchange-destination patch

4.Rotate the PATCH/VALUE dial to select the exchange destination User patch.

*To cancel the exchange, press [EXIT]. The Play screen returns to the display.

5.Press [WRITE].

The patch stored in the exchange source memory location and the patch stored in the exchange destination memory location are exchanged, and you’re returned to the Play screen.

Initializing Patches

You can return (initialize) the User patches to their original standard settings.

3

2,4

1.Select the User patch you want to initialize.

* Refer to “Patch Change” (p. 18).

2.Press [WRITE].

3.Press PARAMETER [ ] twice.

The screen for specifying the initialize-destination patch number appears in the display.

User patch to be initialized

*You can use the PATCH/VALUE dial to change the selection of the User patch to be initialized.

*To cancel the initialization, press [EXIT]. The Play screen returns to the display.

4.Press [WRITE].

The GS-10 switches to the initialized patch, and the Play screen returns to the display.

*The tones stored in patches are lost once the initialization is executed.

26

Page 26
Image 26
Boss Audio Systems GS-10 owner manual Exchanging Patches, Initializing Patches