Boss Audio Systems GS-10 owner manual 152, Click Continue

Installing & Setting Up the Driver (Macintosh)

The About Quick Setup dialog box will appear.

fig.11-520

*If the dialog will not appear, select “Quick Setup” from the Configuration menu.

7.Click [Continue].

*If the dialog box does not show “GS-10 Driver,” check whether the GS-10 is connected correctly, and start up FreeMIDI Setup once again.

8.In the dialog box that appears, set “Studio Location:” to “GS-10,GS-10 Port.” For

the “Cable” field located below it, choose Cable 1 and click [>>Add>>].

fig.11-521

9.Repeat step 8 up to Cable 2.

10.When settings are complete, click [Done].

A setting window will appear.

11.In the setting window, change the device name indicating the MIDI device connected to the GS-10 as follows.

Click the device name, and you will be able to edit it.

Device 1: GS-10 MIDI IN,OUT

Device 2: GS-10 CONTROL

fig.11-530

12.From the File menu, select [Save], and save your settings.

13.Verify that MIDI transmission and reception occur correctly.

From the MIDI menu, choose “Check Connections.”

If a MIDI sound module is connected to the GS-10, the following step will cause a relatively loud sound to be produced by the sound module, so it is a good idea to turn down the volume on the sound module first.

152