Chapter 8 Using the GS-10 with External MIDI Devices Connected

Settings Example: When Using SONAR 2.0

The following settings allow you to control the sequencer Play/Stop, Reset, and Record functions from the GS-10. (With SONAR 2.0, these are set according to note names (Keys) rather than Note messages.)

1.From the Options menu, choose “MIDI Devices.”

2.In the “MIDI Devices” dialog box, select [BOSS GS- 10 Control] as both the Inputs and Outputs.

3.From the Options menu, choose “Key Bindings.”

4.Make the following settings in the “Key Bindings” dialog box.

[Type of Keys]

Check “MIDI” and “Enable”

[MIDI ‘Shift’ Options]

Check “Key”, and input “C -1”

5.In the [Bindings] area, set [Key] to [D -1].

6.In the [Function] area, select [Transport Stop].

7.Click the [Bind] button.

The [Key] [D -1] will be connected to the [Function] area [Transport Stop].

8.In the [Bindings] area, set [Key] to [E -1].

9.In the [Function] area, select [Transport Play].

10.Click the [Bind] button.

The [Key] [E -1] will be connected to the [Function] area [Transport Play].

11.In the [Bindings] area, set [Key] to [F -1].

12.In the [Function] area, select [Transport Reset].

13.Click the [Bind] button.

The [Key] [F -1] will be connected to the [Function] area [Transport Reset].

14.In the [Bindings] area, set [Key] to [G -1].

15.In the [Function] area, select [Transport Record].

16.Click the [Bind] button.

The [Key] [G -1] will be connected to the [Function] area [Transport Record].

Repeat Steps 5–16 so that the following settings are created.

 

Note #

Key

Function

Reset

05

F-1

Transport Reset

 

 

 

 

Stop

02

D-1

Transport Stop

 

 

 

 

Play

04

E-1

Transport Play

 

 

 

 

Rec

07

G-1

Transport Record

 

 

 

 

17.Click the [OK] button to finish making settings. The “Key Bindings” dialog box will close, and the settings will be completed.

Section 8

77

Page 77
Image 77
Boss Audio Systems GS-10 owner manual Settings Example When Using Sonar, Type of Keys, Midi ‘Shift’ Options