Sanyo vcc-zm300p instruction manual Manual iris setting, View Setting, English

VIEW SETTING

Manual iris setting

Sets electronic iris ON/OFF, lens aperture and iris level.

1MAIN MENU

LANGUAGE	SET	‚
CAMERA ID	OFF
SYNC	INT
PRIVACY MASK	SET	‚
LENS	SET	‚
MIRROR	OFF
VIEW SETTING	1	‚
OPTION	SET	‚

2VIEW SETTING 1

IRIS	MANU	‚
WHITE BALANCE	ATW	‚
SHUTTER	LONG ‚
MOTION	OFF
APERTURE	ON	‚
AGC	ON	‚
GAMMA	ON

3IRIS SETTING

EI		ON
	(IRIS STOP)
í	------+------	ú
	(LEVEL)
í	----ú-+------	ü

5		IRIS SETTING
EI			ON
		(IRIS STOP)
17	í	------+------	ú	17
		(LEVEL)
40	í	----ú-+------	ü	40

English

1Use the cursor button (j or l) to move the cursor to

VIEW SETTING, then press the SET button. (Ex: 1) The VIEW SETTING 1 screen will appear.

2Use the cursor button (d or c) to select MANU, then press the SET button.

The IRIS SETTING screen will appear.

3Electronic IRIS setting

Use the cursor button (d or c) to select El. (Ex: ON)

Note: When SENSE UP is activated for IRIS SETTING, the electronic shutter cannot be forcibly moved.

4Lens aperture setting

Use the cursor button (j or l) to move the cursor to IRIS STOP, then use the cursor button (d or c) to select the value.

Available settings: 1 – 17 (Aperture opening)

Note:

•The smaller the value the more the aperture closes and the image darkens.

•Changes to the value directly control the aperture of the lens.

5Use the cursor button (j or l) to move the cursor to LEVEL, then use the cursor button (d or c) to select the value.

Available settings: 0 – 100 (Level of opening)

Note:

•The smaller the value the more the video level drops, becoming darker.

•The LEVEL setting controls both AGC circuit gain and shutter speed, changing the amount of exposure.

☞To close the menu screen or return to the previous screen, select BACK or END for MENU and press the SET button.

Note:

•If the iris views an unusually bright image, it can cause a smear that cannot be corrected by adjusting the light entering through the lens. In this case, arrange the physical angle of lighting in a way that will prevent on-screen smearing.

•If flickering of the target object occurs because of florescent lighting in the camera location, changing to incandescent lighting will prevent the flickering.

30