English
VIEW SETTING
DMOTION detector setting
This function divides the monitor screen into 48 zones (8 x 6). Based on information from the separate zones, target images that show intruder movements are detected and an alarm is generated. The degree of motion to be detected can be finely set.
Note:
•Before activating this setting, use the cursor button to select a surveillance location that will not detect motion.
•When SHUTTER speed is in LONG mode and IRIS SETTING has SENSE UP activated, the MOTION function cannot be turned ON.
1MAIN MENU
LANGUAGE | SET | ‚ |
CAMERA ID | OFF |
|
SYNC | INT |
|
PRIVACY MASK | SET | ‚ |
LENS | SET | ‚ |
MIRROR | OFF |
|
VIEW SETTING | 1 | ‚ |
OPTION | SET | ‚ |
PRESET | OFF |
|
MENU | END |
|
2VIEW SETTING 1
IRIS | AUTO ‚ | |
WHITE BALANCE | ATW | ‚ |
SHUTTER | OFF |
|
MOTION | ON | ‚ |
APERTURE | ON | ‚ |
AGC | ON | ‚ |
GAMMA | ON |
|
PRESET | OFF |
|
MENU | BACK |
|
MOTION SETTING | 3 | |
SIZE | SET | ‚ |
MASKING | ON | ‚ |
SENSITIVITY | SET | ‚ |
ZOOM | OFF |
|
INTERVAL | 5S |
|
ALARM SIGN | OFF |
|
PRESET | OFF |
|
MENU | BACK |
|
MOTION SIZE
V1
H1
PRESET | OFF |
MENU | BACK |
1 Use the cursor button (j or l) to move the cursor to | 3 MOTION SIZE setting | |
VIEW SETTING, then press the SET button. (Ex: 1) | Sets the target object size desired for detection in the 48 zone | |
The VIEW SETTING 1 screen will appear. | screen. | |
2 Use the cursor button (j or l) to move the cursor to | Press the SET button again. | |
MOTION, and then use the cursor button (d or c) to | The MOTION SIZE screen appears and the “1” for “V” will be | |
select ON. Then press the SET button. | ||
blinking. | ||
The MOTION SETTING screen will appear and SET for SIZE will | ||
| ||
be blinking. |
|
37
