Sanyo vcc-zm300p instruction manual Lens Setting Lens, English

LENS SETTING (LENS)

☞Setting the autofocus (AUTO)

Sets a limit for near distance focusing and sets focusing sensitivity and focus iris.

Note: As a normal practice, use manual focus when keeping the camera focused on the same target object for a long period of time (over 24 hours). This can be used with the one-push autofocus function when needed (operated from the system controller). Long periods of surveillance with the autofocus in operation will shorten the work life of the lens.

English

1	MAIN MENU		2
	LANGUAGE	SET	‚
	CAMERA ID	OFF
	SYNC	INT
	PRIVACY MASK	SET	‚
	LENS	SET	‚
	MIRROR	OFF
	VIEW SETTING	1	‚
	OPTION	SET	‚
	PRESET	OFF
	MENU	END

LENS

FOCUS	AUTO ‚
ZOOM	SET	‚
FOCUS SETTING
LIMIT NEAR	1M
SENSITIVITY	HIGH
AREA	SET	‚

3	FOCUS SETTING		4	FOCUS SETTING
	LIMIT NEAR	3M		LIMIT NEAR	3M
	SENSITIVITY	HIGH		SENSITIVITY	LOW
	AREA	SET ‚		AREA	SET ‚
	PRESET	OFF		PRESET	OFF
	MENU	BACK		MENU	BACK

1Use the cursor button (j or l) to select SET for LENS, then press the SET button.

The LENS screen will appear.

2Use the cursor button (d or c) to select AUTO, then press the SET button.

The FOCUS SETTING screen will appear.

3LIMIT NEAR focus distance setting

Use the cursor button (j or l) to move the cursor to LIMIT NEAR, then use the cursor button (d or c) to change the distance value. (Ex: 3M)

Available settings: 1M (meter), 3M, 5M, 10C (centimeters), 30C, 50C

Note: Focusing becomes difficult when near distance limit is set to less than “1M”.

4Setting focus SENSITIVITY

Use the cursor button (j or l) to move the cursor to SENSITIVITY, then use the cursor button (d or c) to change the setting. (Ex: LOW)

Available settings:

•HIGH: High sensitivity focusing

•LOW: Low sensitivity focusing

Note: When focus SENSITIVITY is set to HIGH, it may react to even slight movements of the target object. In this case, change the setting to LOW.

18